- NETWORK & MUSIC SERVERS
- AMPLIFIERS - INTEGRATED, PRE & POWER
- CD PLAYERS
- SYSTEMS & BLUETOOTH
- DACs & USB
- TURNTABLES & ACCESSORIES
- Noise Filters
- Tuning Accessories
- HEADPHONE AMPLIFIERS
Imagine a world where music just flows, where all you needed was a set of loudspeakers. No complex electronics, no unwanted cables, no jumble of remote controls, nothing but pure uncomplicated enjoyment.
DALI ZENSOR AX series set you free from the electronics traditionally associated with a high quality audio experience. Both the stand mount and the floor standing model come complete with all you need. They require nothing extra, just connect the mains and you are ready to play.
The build in 2 x 50W stereo all digital amplifier delivers the audio signal to both speakers and is designed to bring out the best from its ZENSOR host regardless of the signal type. You can use Bluetooth and Apt-X if your device supports it, you can connect an analogue source with a mini-jack or an optical via TOSLink.
Driving the ZENSOR AX series is a fully digital Class-D 2 x 50 Watts amplifier.
Making full use of the purely digital signal path, the Optical input reads any TOSLink signal with a sampling rate between 32 – 176.4 KHz at a bit rate from 16 to 24 bit. The Optical signal is passed to the DSP and then onwards to the amplifier.
Both the analogue signal and the signal from the Bluetooth interface is passed through the A/D converter and converted from its analogue state into a 24 bit 96 KHz digital signal. Sampling
the analogue signal from the Bluetooth receiver helps make any noise more random and way more musical. This together with the high quality Apt-X compression format supported by the
ZENSOR AX helps keep the Bluetooth audio signal at the best possible quality level. Once the signal has passed through the A/D converter, it is then passed onto the DSP.
DALI believes in a hands-off approach to the audio signal and therefore no equalisation is performed on the signal by the DSP. The main function of the DSP is to handle non-clipping
controlling, thereby keeping the signal clear and powerful at any frequency.
|Frequency Range (+/-3 dB) [Hz]||43 - 26,500|
|Maximum SPL [dB]||106|
|Crossover Frequency [Hz]||2,400 Hz|
|High frequency driver, Quantity||1 x 25 mm|
|High frequency driver, Diaphragm type||Soft Textile Dome|
|Low frequency driver, Quantity||2 x 5.25"|
|Low frequency driver, Diaphragm type||Wood Fibre Cone|
|Enclosure type||Bass Reflex|
|Amplifier Type||Fully digital class D (Open loop type)|
|Input Impedance [ohms]||12.6k|
|Connection Input||3.5mm mini jack
|Connection Output||SUB Out|
|Wireless Input(s)||Bluetooth™ Apt-X|
|Recommended Distance From Wall [cm]||20 - 80|
|Max. Power Consumption [W]||160W|
|Standby Power Consumption [W]||<0.5W|
|Dimensions With Base (HxWxD) [mm]||825 x 162 x 282|
Speaker Wire (For Right Speaker)
|Analogue Input Sensitivity [mV]||300|
|Continous IEC Amplifier Output [RMS watt]||2 x 50W|
|Max. Digital Resolution [bits/KHz]||24 / 96|
|Input Mains Voltage [Volts]||Universal mains 100 - 240V|